结构振动控制中压电阻尼技术研究：（三）机敏约束层阻尼技术

给出了机敏约束阻尼概念，阐述了机敏约束层阻尼系统特征，分析了结构设计和系统建模方法。以典型梁系统为例，比较了被动约束阻尼技术和机敏约束层阻尼技术减振效果。结果表明；机敏约束层阻尼控制技术是一种更为有效的振动控制方法。最后，提出了今后重点研究问题。     

钛酸铅系薄膜的热释电性能及其应用

叙述了钛酸铅系薄膜的热释电原理，介绍了国际上近几年钛酸铅系薄膜材料、制备工艺及热释电性能，并与块状陶瓷材料进行了比较，分析表明钛酸铅系薄膜具有优良的热释电性能及可观的应用前景。     

纳米技术的研究现状与将来

纳米科学技术将成为２１世纪最重要的高技术之一。纳米技术的最终目标是直接操纵单个原子和分子，制造量子功能器件，从而开拓人类崭新的生产生活模式。文章评述利用电子束、离子束的精细技术和ＳＴＭ原子操纵技术的研究现状，介绍原子层蚀刻，单层抗蚀剂自形成蚀刻，纳米自然蚀刻和电子束全息纳米蚀刻等高技术前沿动态，展望纳米技术的发展前景。     

高温超导研究的新进展

本文简要回顾了一年来高温超导的新进展，特别介绍和讨论了新型高温超导体系和线材、带材、块材及薄膜应用的发展情况。     

管内机器人研究中的几项新技术

介绍了我们研制的管内机器人中应用的具有创新性的三项技术：１．轮式全主动新型行走机构；２．内壁环带视觉装置；３．新型离心喷涂器。     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

ABS／PC／MMA类共聚物Q三元共混体系的性能和形态

本文研究了ABS/PC甲基丙烯酸甲酯(MMA)共聚物Q三元共混物的性能与Q含量的关系,对不同Q含量下共混物的拉伸、冲击、弯曲、耐热、熔体指数等性能进行了测试,并用扫描电镜观察了该三元共混物的形态。结果表明,加入共聚物Q可增加共混体系的相容性,在适当组成下可使共混物的弯曲强度提高到原来的1.7倍,同时其他力学性能有所提高或不受损失;共混物的熔体指数能符合工业生产要求。从经济角度看,Q价格也较低。因而ABS/PC/Q三元共混物可望开发为具有重要实际意义的塑料合金。     

小波分析及其在时变滤波和信号分离中的应用

利用小波变换具有的多时频分辨率特性，对地震勘探和测井信号这类非平衡信号进行分析，可以充分利用信号的时间－频率特性。文中介绍了小波变换的基本概念及其在地震勘探信号的时变滤波和声波全波列测井信号的信号分离中的应用，实例表明，小波变换在地球物理信号中具有广阔的应用前景。图５参７     

参考信号频率自调整的数字相敏检波器算法的研究

本文提出了一种不需要外接同频参考信号的数字相敏检波器算法。该算法首先提取计算机产生的参考信号与被测信号频率的差值，然后根据该差值调整参考信号的频率直到满足要求。本文还讨论了数字相敏检波器的幅频特性，仿真试验表明理论分析与实际结果是一致的。该算法可以用于同频参考信号不能获得时正弦信号的幅度和相位测量。     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.